Polymer Nation F-70 Medium Speed 83% Solids Pigmented Polyaspartic
Product Overview
Polymer Nation F-70 combines a proprietary blend of polyol with Iso to create an intermediate speed, pigmented polyaspartic. F-70 is a 83% solids, low viscosity polyaspartic that provides easy application with a moderately fast dry time. It will not yellow or chalk over time and provides great opacity which makes it is easy to create a solid looking finish with as little as 6 mils WFT
Uses and Benefits
Polymer Nation F-70 is primarily used as a moderately fast setting, pigmented topcoat due to its unsurpassed UV and abrasion resistance. It can be applied to floors and walls and adheres well to many substrates including concrete, gypsum, cement board, metals and fiberglass.
Technical Data Sheet
The data below was gathered at temperatures of 72-75°F and 30-50% R
| Mix Ratio by Volume | 2:1 |
| Mixed Viscosity | 600-700 cP 25°C/77°F |
| Gel Time | N/A |
| Dry to Touch | 1 hours |
| Through Dry | 5 hours |
| Dry to Walk | 7 hours |
| Dry to Light Use | 12 hours |
| Full Cure | 7 days |
| Pendulum Hardness (König) | 18 @ 24 hours |
| Pendulum Hardness (König) | 50 @ 7 days |
| Gloss @ 60 Degree Angle | >90 |
| VOC’s of Mixed Material | <50 g/l EPA Method 24 |
| Color Scale | N/A |
| Solids by Volume Mixed | 83% |
| Application in Mils | 4-15 |
| Available Colors | White, Light Gray, Warm Sun |