Polymer Nation F-10 SL Pigmented Epoxy Slurry
Product Overview
Polymer Nation F-10 SL combines their pigmented, nonylphenol-free, epoxy resin, their blended cycloaliphatic reactant and Slurry Aggregate PN 1360 to create an easy to use slurry material. This mixture allows the installer to create a pigmented, high-build, epoxy flooring system in a shorter amount of time than double broadcasting the floor. The cured material has high compressive strength (three times that of concrete) , great impact resistance and a broad range of resistance to chemical attack. It is virtually odor-free.
Uses and Benefits
Polymer Nation F-10 SL is primarily used as a fast setting epoxy overlay to protect and/or repair concrete when sloping is not required. On solid concrete, the system is self-priming and with the appropriate conditions and a skilled installer it can be left as a high-build, single step flooring system. When conditions or skill do not allow a one step process, a broadcast of select aggregates and fillers can be used to help level the floor and release trapped air
Technical Data
The data below was gathered at temperatures of 72-75°F and 30-50% RH
| Packaging | 3 Gallon kits + Agg |
| Mix Ratio by Volume | 2:1 + 50lb Agg |
| Mixed Viscosity | 300-400 A&B cP 25°C/77°F |
| Gel Time | 25 minutes |
| Dry to Touch | 2 hours |
| Through Dry | 3-4 hours |
| Dry to Walk | 4-6 hours |
| Dry to Light Use | 6-8 hours |
| Full Cure | 3 days |
| Shore D Hardness | D65 @ 24 hours |
| Shore D Hardness | D78 @ 7 days |
| Gloss @ 60 Degree Angle | 60-70 |
| VOC’s of Mixed Material | <50 g/l EPA Method 24 |
| Color Scale | 0.5-1.0 per ASTM D1500 |
| Solids by Volume Mixed | 100% |
| Application in Mils | |
| Available Colors | White, Light Gray, Medium Gray, Warm Sun |